12 Companies Leading The Way In Window Handle Replacement

Choosing the Right Window Handle For Your UPVC Window

Selecting the correct window handle is essential to having a properly-fitting uPVC window. You'll require a design that is not only functional, but also complements the aesthetics of your home.

Making changes to a uPVC window handle is very simple. All you require are the tools listed below and only a few minutes of your time.

Metal

Metal window handles are an attractive piece of furniture and a necessary hardware item to increase the security of your home. A variety of metal window handles are available that can be adapted to a variety of frames and materials. Certain designs are specifically created for sash windows in order to in making opening and closing the windows smoother and less likely to get jammed. If you're seeking a safer option, there are also a number of metal locking mechanisms that are designed to stop the window from opening beyond a certain level.

Espag handles are perhaps the most well-known type of window handle that is used on UPVC windows. They feature a mental spindle in the back, which is connected to the frame of the window and drives the window mechanism. They are found on both UPVC and aluminium windows.

Cockspur handles can be found on older UPVC window frames. They can be more difficult than modern Espag handles since they utilize a traditional peg locking mechanism.

Cam handles are available for a sleeker look. These handles have a sleek edge, and are made to work with different types of uPVC windows. They are ideal for tilt and turn windows, where you can open the window from the bottom, while being able to open the top.

It is important to take several aspects into consideration when selecting new window handles made of steel, including step height and the direction in which the handle rotates. The first refers to the distance between the underside of the handle nose and the bottom of the screw plate, while the latter is which direction the handle will be able to turn. Certain handles can only rotate in only one direction, like clockwise. Others are able to rotate in the opposite direction.

Plastic

There are a variety of window handles made of plastic. All are designed to operate windows and secure them against unwanted invaders. They are available in a range of styles and colours to suit uPVC and aluminium windows. Some are constructed with a lock that is built-in. This increases security and allows you to leave the window open, while being secure from intruders.

Many different situations can cause window handle problems. Sometimes, they may not be able to turn correctly. This can be caused by dust entering the mechanism, which causes obstruction or dirt. Another problem that can be observed is when the window handle begins walking tightly or clings to something. This is a sign the window handle requires attention.

It is crucial to speak with an expert when this happens. They can assist you in resolving the problem quickly and effectively. They can also give advice on replacing a plastic window handle with new ones that will work better and more consistently.

Whatever type of handle you've got the majority of manufacturers use the same fasteners. It's therefore easy to replace the window handle and lock using the exact model.

It's important to understand the size and design of your window before you begin looking for an appropriate replacement handle. This will help ensure that you purchase a handle that is perfect and won't cause any problems with your windows. Also, be sure to take note of the spindle length - this refers to how far the handle extends from the base. This is crucial in the event that you intend to utilize a window handle that has restrictions.

Casement

Like awning windows and casement windows hinge on the top and bottom, but they open to the left or right rather than opening vertically. They are also less difficult to maintain and give you a fantastic view of your yard or garden. They also let fresh air in. They are a popular option for new construction, and can also add architectural value to older homes. As time passes, they may become difficult to open and close due to worn-out hardware or stripped gears. In some instances windows, a professional might have to replace the entire crank mechanism.

Awning windows or casement windows are typically equipped with a crank mechanism and roto gear to allow the window to open and shut. They also come with the mechanism to lock the sash in place when closed. The lock on an window that is awning works with bezel locks to seal the window. Unfortunately, many people overtighten the handle on a casement window. This can cause the locking mechanisms to work against one with the windows to be bind, and not open or close properly.

Over time, the window crank handle can also become stripped. This could happen if the window has been opened and closed repeatedly for many years. It can also happen if the window was used as a prop while it was closed and causing the handle to hit and damage the crank shaft or gears.

Replacing a window with a casement or an awning window crank is a simple DIY window repair. It can save you money over time. You'll first have to locate the trim mounting screw that holds the casement cover (Photo 3). After removing the screws you can take off the handle from the previous one and inspect the crank mechanism. The gears can be lubricated again, however if they're already stripped, you may need to replace them.

Cockspur

Cockspur handles are commonly found on older uPVC windows and doors, as well as aluminum and timber. These handles are easy to use, lock with the use of a key, and also provide protection against cold and noise from the outside. The handle opens by pulling the lever down and the cockspur nose shuts over a wedge striker inside the frame to seal the window when closing. Replacing both the handle as well as the cockspur wedge strikes can make your double glazed windows significantly more efficient and can improve security.

door handles  are available for both left and right-handed windows. They can be operated by turning them 90degrees. The handles are equipped with a spur that presses against the PVC wedge of the window frame to secure the closing. The handles are easy to install and are available in a variety of styles, including satin chrome, white and PVD gold.

Measuring the backset of a cockspur's handle can be tricky, especially when you're replacing an existing handle. This handle was created to address this issue. It comes with three packers of different thicknesses that can be installed on the underside of the handle nose.

The Schlosser Technik Apto is a top-quality replacement cockspur with flexible screw fixing centers. It can be used for many applications between 9mm to 21mm. It is also easy to install with key locking and is available in a variety of finishes.

This cockspur handle will fit tilt and turn windows, but not side-opening casement windows (which have a pivot that is separate from the turn and tilt). This handle can be used to replace damaged or old handles on uPVC and aluminium frames by using rivets instead of screws. You will require the use of a rivet gun as well as rivets to attach this handle to your existing window frame.

Espagnolette

Espagnolette window handles, also referred to shootbolts or espagnolette locks, are the locking mechanism that connects to the multi-point lock system in your uPVC windows. These are typical in older homes and offer both aesthetics as well as security. Espagnolette handles are available with key-locking or non-key-locking mechanisms, and are available in both inline and crank styles. They can be straight or curved. The key-locking push button offers extra security since it prevents the handle from being pushed open from the outside by a long thin screw driver that is stuck between the frames - a very common way of committing burglary!

GB DIY Store offers a wide range of handles that are espagnolette. It is important to measure the spindle size of the handle you currently have before making a purchase for a replacement. Once you've measured the spindle length of your current handle, look through our range of espag handles to locate the ideal style for your windows.

We have a wide assortment of white uPVC handles that are espagnolette, with key locking and non-key locking options. They are available in a variety of colours and spindle lengths so you can match your new handles to your existing window frame and decor. Our espagnolette handle collection includes classic and modern designs and contemporary styles. Each replacement handle comes supplied with 5 interchangeable magnetic spindle sizes ranging from 15mm and 55mm, so you can easily fix the handle to your windows without having to buy a specific screw size!

A clever rose on the back of the rose will ensure that the spindle fits in the right spot and can only be inserted using the left-hand or right-hand lever, which will prevent any accidents. A metal spindle insert also assists in securing the espagnolette handle in place, and the handle is held in place by the clever click-fit mechanism that activates when rotated by hand to emit an audible click'.